bluez-hfp manual

medium

Image Types:
basesdk-amd64 / hmi-armhf / hmi-arm64 / hmi-amd64 / sdk-amd64
Image Deployment:
APT, OSTree
Type:
functional

Description

Test Hands Free Profile (HFP) BlueZ feature.


Resources

  • A Bluetooth adapter
  • A Bluetooth-enabled phone with a SIM card and a data plan. (https://www.apertis.org/reference_hardware/extras/)

Pre Conditions

  1. From a PC, download and unpack the test data tarball from the gitlab test repository:
  2. $ wget https://gitlab.apertis.org/tests/bluez-phone/-/archive/apertis/v2025pre/bluez-phone.tar.gz
    $ tar -xvf bluez-phone.tar.gz
  3. Copy the bluez-phone-* folder to the target device:
  4. $ DUT_IP=<device-ip>
    $ scp -r bluez-phone-* user@$DUT_IP:
  5. Log into the target device:
  6. $ ssh user@$DUT_IP
  7. After log into the DUT, enter the test directory
  8. $ cd bluez-phone-*
  9. Note that the tarball may change depending on the release/branch being tested, please make sure to download the correct tarball for the release in question.
  10. Please note that connman disables bluetooth by default on a fresh image.
  11. Enable device:
  12. $ connmanctl enable bluetooth
  13. When running the test on SabreLite boards using the headphone jack to check the audio output, the audio manager needs to be configured to route it accordingly as it defaults to the HDMI output:
  14. $ pactl set-default-sink alsa_output.platform-sound.stereo-fallback
    $ pactl set-sink-port alsa_output.platform-sound.stereo-fallback analog-output-headphones
  15. After reboot ensure that headphones will not be muted:
  16. $ pactl set-sink-mute alsa_output.platform-sound.stereo-fallback false

Execution Steps

  1. The phone must be in discoverable mode for starting this test. Look for the phone in this list, and save the BT address. It will be used while running the test.
  2. Execute the test suite inside an environment with dbus:
  3. $ ./bluez-hfp.sh
  4. There are some options:
  5. -a select which device you want to pair with (specify the address)

    -s skip pairing because the device is already paired. -a must be present when using this.

    -x enables test debugging (only useful if a test fails)

  6. Once the test begins, after Apertis finishes pairing with the phone, you must initiate pairing from the phone and do the pairing again as part of the test. You may need to unpair Apertis from within the phone first. The test will display the following message when that is required:
  7. Start a pairing from the phone! was it successful (y/n).

  8. After you've initiated the pairing from the phone, the test will continue.
  9. If the pairing fails from the test, try to do the pairing separately, and then run the test using './bluez_hfp.sh -a <phone addr> -s'. To do a separate pairing: unpair the phone, and run 'bluetoothctl'. Then, in bluetoothctl prompt, issue the following commands in order: 'remove <phone addr>', 'discoverable on', 'agent off', 'agent NoInputNoOutput', 'default-agent'. The either 'pairable on' to pair from phone, or 'pair <phone addr>' to issue a pairing to the phone. '<phone addr>' is the phone address of the form 'a1:b2:c3:d4:e5:f6'.
  10. The next step is to initiate a call from the phone. This can be done by entering the contact. The test will display the following message when that is required:
  11. Did you recieved the call (y/n)

  12. After you’ve recieved the call in other phone number continue.
  13. The next step is to call from other phone to the phone connected to the bluetooth adapter. The test will display the following message when that is required:
  14. Did you hear the call (y/n):

  15. After you’ve heard the call from other phone number the test case is passed

Expected

If PASSED is displayed, all of the test have passed. The output should be similar to that:

select_adapter

 Selected /org/bluez/hci0

 hci0

 select_device: Discovering...

 (According to introspection data, you need to pass 'ss')

 Device found: 20:34:FB:8B:C6:06 <unnamed>

 Device found: 30:C3:D9:90:C2:43 ICC6.5in

 Device found: 20:34:FB:6E:2F:FC pairing

 Input device address: 20:34:FB:6E:2F:FC

 Selected address: 20:34:FB:6E:2F:FC

 test_pairing_initiator

 Master: hci0

 Slave: 20:34:FB:6E:2F:FC (bdaddr)

 Master address: 00:02:72:A7:C3:03

 Slave address: 20:34:FB:6E:2F:FC

 Matching 

 type='signal',interface='org.freedesktop.DBus.ObjectManager',member='Interfaces

 Added',path=/,

 Matching 

 type='signal',interface='org.freedesktop.DBus.Properties',member='PropertiesCha

 nged',arg0='org.bluez.Device1'

 Scanning

 Property changed: org.bluez.Device1

 Property: RSSI

 Property changed: org.bluez.Device1

    Property: RSSI

    Property: Name

    Property: Alias

    Property: UUIDs

 Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Pairing requested: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Property changed: org.bluez.Device1

    Property: Connected

 RequestConfirmation (/org/bluez/hci0/dev_20_34_FB_6E_2F_FC, 696478)

 Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Property changed: org.bluez.Device1

    Property: Modalias

    Property: UUIDs

    Property: ServicesResolved

    Property: Paired=1

 Successfully paired to /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Done

 Device found: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Device 20_34_FB_6E_2F_FC is paired

 test_pairing_responder

 Start a pairing from the phone 20:34:FB:6E:2F:FC!

 Master: hci0

 Slave: 20:34:FB:6E:2F:FC (bdaddr)

 Master address: 00:02:72:A7:C3:03

 Slave address: 20:34:FB:6E:2F:FC

 Matching 

 type='signal',interface='org.freedesktop.DBus.ObjectManager',member='Interfaces

 Added',path=/,

 Matching 

 type='signal',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged',arg0='org.bluez.Device1'

 Pairable: True

 Discoverable: False

 Waiting for pairing

 Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Property changed: org.bluez.Device1

 Property: UUIDs

 Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Property changed: org.bluez.Device1

    Property: Modalias

    Property: UUIDs

    Property: ServicesResolved

    Property: Paired=1

 Successfully paired to /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Done

 Device found: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 Device 20_34_FB_6E_2F_FC is paired

 test_profiles

 OBEXObjectPush

 AudioSource

 AV Remote Control Target

 Unknown profile '0000110d-0000-1000-8000-00805f9b34fb',

 AV Remote Control

 Headset Audio Gateway

 PANU

 NAP

 Handsfree Audio Gateway

 test_profile_hfp_src

 select_objectpath_hfp

 /org/bluez/hci0

 /hfp/org/bluez/hci0

 '/hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC',

 object path going/hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC

 $OBJECTPATHHFP is not empty

 Type the phone number to call:7798433607

 Dialing to the phone number: 7798433607

 Calling .......

 CALL_PATH /hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC/voicecall01

 Did you recieved the call (y/n):

 y

 Hanging up the call

 ()

 From a second phone call the phone connected to oFono

 ([(objectpath '/hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC/voicecall01', {'State': <'incoming'>, 'LineIdentification': <'+918618923989'>, 'Name': <''>, 'Multiparty': <false>, 'RemoteHeld': <false>, 'RemoteMultiparty': <false>, 'Emergency': <false>})],)

 Call incoming

 Did you hear the call (y/n):

 y

 Hanging up the call

 ()

 SimAccess

 PBAP Phonebook Access PSE

 MAP Message Access Server

 PnPInformation

 Unknown profile '00001800-0000-1000-8000-00805f9b34fb',

 Unknown profile '00001801-0000-1000-8000-00805f9b34fb']>,)

 PASSED

If FAILED is displayed, bluez-hfp test has failed and the test sequence is interrupted.

Notes

  • Errors most frequently occurs at pairing. This can be used to circumvent pairing problems, though this does not mean the test is a full pass, as the pairing is part of the test:
  • cd ~/bluez-phone-master

    armhf/bin/pair_two hci0 <bt address of the phone>

    ./bluez-hfp.sh -a <address of the phone> -s