wifi-wpa2-psk-accesspoint-setup manual

critical

Image Types:
hmi-armhf / hmi-amd64
Image Deployment:
APT
Type:
functional

Description

Test WiFi WPA2-PSK access point (AP mode) is working in Apertis. Also check connection is re-established after rebooting the AP.

Resources

  • Two Wi-Fi USB dongles, https://www.apertis.org/reference_hardware/extras/

Pre Conditions

  1. Make sure to connect the Wi-Fi USB dongles to both target and SDK.

Execution Steps

  1. On the target device execute the below steps.
  2. Set the configuration parameters for this test case:
    3. $ WIFI_KEYMGMT="WPA-PSK"
    $ WIFI_80211W=1
  3. Execute the steps as in wifi-wpa3-transition-mode-accesspoint-setup.yaml

Expected

Check the same expected results as in wifi-wpa3-transition-mode-accesspoint-setup test case