Image Types:

basesdk-amd64 / hmi-armhf / hmi-amd64 / sdk-amd64

Image Deployment:

APT, OSTree

Type:

functional

Description

Test Hands Free Profile (HFP) BlueZ feature call and hold.

---

Resources

• A Bluetooth adapter
• A Bluetooth-enabled phone with a SIM card and a data plan. (https://www.apertis.org/reference_hardware/extras/)

---

Pre Conditions

1. From a PC, download and unpack the test data tarball from the gitlab test repository:

$ wget https://gitlab.apertis.org/tests/bluez-phone/-/archive/apertis/v2025dev1/bluez-phone.tar.gz

$ tar -xvf bluez-phone.tar.gz

2. Copy the bluez-phone-* folder to the target device:

$ DUT_IP=<device-ip>

$ scp -r bluez-phone-* user@$DUT_IP:

3. Log into the target device:

$ ssh user@$DUT_IP

4. After log into the DUT, enter the test directory

$ cd bluez-phone-*

5. Note that the tarball may change depending on the release/branch being tested, please make sure to download the correct tarball for the release in question.
6. Please note that connman disables bluetooth by default on a fresh image.
7. Enable device:

$ connmanctl enable bluetooth

8. When running the test on SabreLite boards using the headphone jack to check the audio output, the audio manager needs to be configured to route it accordingly as it defaults to the HDMI output:

$ pactl set-default-sink alsa_output.platform-sound.stereo-fallback

$ pactl set-sink-port alsa_output.platform-sound.stereo-fallback analog-output-headphones

9. After reboot ensure that headphones will not be muted:

$ pactl set-sink-mute alsa_output.platform-sound.stereo-fallback false

---

Execution Steps

1. The phone must be in discoverable mode for starting this test. Look for the phone in this list, and save the BT address. It will be used while running the test.
2. Execute the test suite inside an environment with dbus:

$ ./bluez-hfp.sh

3. There are some options:

-a select which device you want to pair with (specify the address)

-s skip pairing because the device is already paired. -a must be present when using this.

-x enables test debugging (only useful if a test fails)

4. Once the test begins, after Apertis finishes pairing with the phone, you must initiate pairing from the phone and do the pairing again as part of the test. You may need to unpair Apertis from within the phone first. The test will display the following message when that is required:

Start a pairing from the phone! was it successful (y/n).

5. After you've initiated the pairing from the phone, the test will continue.
6. If the pairing fails from the test, try to do the pairing separately, and then run the test using './bluez_hfp.sh -a <phone addr> -s'. To do a separate pairing: unpair the phone, and run 'bluetoothctl'. Then, in bluetoothctl prompt, issue the following commands in order: 'remove <phone addr>', 'discoverable on', 'agent off', 'agent NoInputNoOutput', 'default-agent'. The either 'pairable on' to pair from phone, or 'pair <phone addr>' to issue a pairing to the phone. '<phone addr>' is the phone address of the form 'a1:b2:c3:d4:e5:f6'.
7. The next step is to initiate a call from the phone. This can be done by entering the contact.The test will display the following message when that is required:

Did you recieved the call (y/n)

8. Pick up the call and then put the call on Hold
9. Resume the conversation by unselecting the hold option the phone

---

Expected

If PASSED is displayed, all of the test have passed. The output should be similar to that:

select_adapter

Selected /org/bluez/hci0

hci0

select_device: Discovering...

(According to introspection data, you need to pass 'ss')

Device found: 20:34:FB:8B:C6:06 <unnamed>

Device found: 30:C3:D9:90:C2:43 ICC6.5in

Device found: 20:34:FB:6E:2F:FC pairing

Input device address: 20:34:FB:6E:2F:FC

Selected address: 20:34:FB:6E:2F:FC

test_pairing_initiator

Master: hci0

Slave: 20:34:FB:6E:2F:FC (bdaddr)

Master address: 00:02:72:A7:C3:03

Slave address: 20:34:FB:6E:2F:FC

Matching type='signal',interface='org.freedesktop.DBus.ObjectManager',member='InterfacesAdded',path=/,

Matching type='signal',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged',arg0='org.bluez.Device1'

Scanning

Property changed: org.bluez.Device1

Property: RSSI

Property changed: org.bluez.Device1

   Property: RSSI

   Property: Name

   Property: Alias

   Property: UUIDs

Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

Pairing requested: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

Property changed: org.bluez.Device1

   Property: Connected

RequestConfirmation (/org/bluez/hci0/dev_20_34_FB_6E_2F_FC, 696478)

Device added: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

Property changed: org.bluez.Device1

   Property: Modalias

   Property: UUIDs

   Property: ServicesResolved

   Property: Paired=1

Successfully paired to /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

Done

Device found: /org/bluez/hci0/dev_20_34_FB_6E_2F_FC

Device 20_34_FB_6E_2F_FC is paired

test_profiles

OBEXObjectPush

AudioSource

AV Remote Control Target

Unknown profile '0000110d-0000-1000-8000-00805f9b34fb',

AV Remote Control

Headset Audio Gateway

PANU

NAP

Handsfree Audio Gateway

test_profile_hfp_src

select_objectpath_hfp

/org/bluez/hci0

/hfp/org/bluez/hci0

'/hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC',

object path going/hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC

$OBJECTPATHHFP is not empty

Type the phone number to call:7798433607

Dialing to the phone number: 7798433607

Calling .......

CALL_PATH /hfp/org/bluez/hci0/dev_20_34_FB_6E_2F_FC/voicecall01

Did you recieved the call (y/n):

y

Receive the call and then put the call on Hold for 15-20 seconds

Resume the call by unselecting the Hold option on your phone

If FAILED is displayed, bluez-hfp test has failed and the test sequence is interrupted.

Notes

• Errors most frequently occurs at pairing. This can be used to circumvent pairing problems, though this does not mean the test is a full pass, as the pairing is part of the test:

cd ~/bluez-phone-master

armhf/bin/pair_two hci0 <bt address of the phone>

./bluez-hfp.sh -a <address of the phone> -s