apertis-update-manager-api manual

low

Image Types:
minimal-armhf
Image Deployment:
OSTree
Type:
functional

Description

Test the apertis-update-manager automatic update. The automated version of this test: https://qa.apertis.org/aum-api.html

Resources

  • A static update bundle file of the same architecture, variant and version as the testing image
  • A Fat32 USB flash drive, preloaded with the update bundle at the root of the disk
  • The latest static update file can be downloaded at the same location than the target image. It has the same basename, and a '.delta' extension
  • The static update file should be copied to the flash drive using the name 'static-update.bundle'.
  • A PC must be connected to DUT serial port

Execution Steps

  1. Check the initial deployment
    2. $ sudo ostree admin status
  2. Prepare the copy of commit and deploy to allow the upgrade to the same version
  3. Command below shows you an initial commit ID, for instance
    4. $ export BOOTID=$(sudo ostree admin status | sed -n -e 's/^\* apertis \([0-9a-f]*\)\.[0-9]$/\1/p'); echo $BOOTID
  4. Get the Collection ID and ref
    5. $ export CID=$(sudo ostree refs -c | head -n 1 | tr -d '(),' | cut -f 1 -d ' '); echo COLLECTION_ID=$CID
    $ export REF=$(sudo ostree refs -c | head -n 1 | tr -d '(),' | cut -f 2 -d ' '); echo REF=$REF
  5. Create the list of files to skip and enshure there are some files in these directories
    6. $ ls -1d /usr/share/locale /usr/share/man /usr/share/zoneinfo > /tmp/skip
    $ du -sh /usr/share/locale /usr/share/man /usr/share/zoneinfo
  6. Create the commit with changed timestamp and skipped list from above to allow upgrade with recent update file
    7. $ export NEWID=$(sudo ostree commit --orphan --tree=ref=$BOOTID --add-metadata-string=ostree.collection-binding=$CID --bind-ref=$REF --timestamp="1 year ago" --skip-list=/tmp/skip); echo "New commit: $NEWID"
  7. Deploy the prepared commit
    8. $ sudo ostree admin upgrade --allow-downgrade --deploy-only --override-commit=$NEWID --reboot
  8. Wait until the system is booted again and check the deployment
    9. $ sudo ostree admin status
  9. The booted commit (started with '*') must have ID which we prepare and the initial commit ID should be marked as '(rollback)'
  10. Check booted deployment have no file objects which we skip
    11. $ du -sh /usr/share/locale /usr/share/man /usr/share/zoneinfo
  11. Remove the initial deployment
    12. $ sudo ostree admin undeploy 1
  12. Reboot the system
  13. Check the current deployment
    14. $ sudo ostree admin status
  14. Start the user interface agent with mode preventing automatic system reboot after update
    15. $ sudo updatectl --register-upgrade-handler &
  15. Plug the USB flash drive into the device
  16. The update starts automatically
  17. After the update, the device does *not* reboot automatically
  18. Check that the user interface agent reports the pending update

    19. ** Message: Upgrade status: Checking

     ** Message: An upgrade is pending

  19. Remove the USB flash drive
  20. Check if there is pending deployment and reboot the DUT
    21. $ sudo ostree admin status
    $ sudo reboot
  21. Check the current deployment has been updated and that the rollback entry points to the prepared deployment
    22. $ sudo ostree admin status
  22. Start the user interface agent
    23. $ sudo updatectl &
  23. Plug the USB flash drive with the same update file into the device
  24. Check that the user interface agent reports the system is up to update

    25. ** Message: Upgrade status: Checking

    ** Message: System is up to date

Expected

CLI utility `updatectl` is able to interact with Apertis update manager

The update was properly applied